Double Eccentric Butterfly Valve DN100 to DN2400 - China Suppliers and Factory for Efficient Water Network Solutions

1. GGG40/50 Ductile Iron Body & Disc allows high impact and streching resistance

2. Double Eccentric / Double Offset Disc Design

3. Resilient Seated Type

4. Disc sealing ring EPDM as default. NBR or VITON options are available

5. Block moulded solid/one-piece T-shaped disc sealing ring extends drop-tight sealing life time

6. Easy to replace disc sealing ring without dismantling the valve from the pipeline and without dismantling the disc from the valve itself just by taking out the retaining ring through its bolts. Iit is easy to replace the disc sealing ring without any additional equipments

7. SS308/316 grade stainless steel welding seat on the body is manufactured through automatic welding machines and microfinished precise milling operation. When disc is fully closed, disc sealing ring applies equal pressure on every point on the welding seat.

8. Drop-tight closure

9. Double O-ring feature on both shafts ensures high sealing

10. Shafts are equipped with bronze bushings having high corrosion resistance

11. Ensures minimized pressure loss and increased energy efficiency with double shaft design

12. With the o-rings on the bearing bushings, disc pin holes are protected against corrosion. Dry shaft up to request.

13. Easy to operate with self locking gearbox equipped with mechanical indicator

14. Low torque requirements during operation

15. Easy to install on the line, light weight and occupies less space

16. Full coating on the body and disc internally & externally with an average of 250 microns. Higher coating thicknesses are available when required.

17. WRAS approved coating available upon request which meets hygienic requirements for potable water applications

18. Maintenance free design for the valve and gearbox

19. Default operation is gearbox with ISO top flange ready to connect electrical actuator. Pneumatic actuators can be installed directly on the top flange of the valve itself.

20. V106 Double Eccentric Butterfly valves are deisgned bi-directional according to EN1074-2. For proper installation, direction arrow on the body should be considered.

21. Operation with extended spindle version is also available

22. Balanced positioned lifting holes on the body ease transportation and installation.

23. Hydrostatic test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.